Table of Contents
Advertisement
3. CAMERA INSTALLATION
Make sure to follow the correct polarity if connecting
the camera to DC power. Polarity is marked on the
power connector.
1. Use the mounting plate or template
to drill holes for the mounting screws
and cables. Align the mounting plate
with the TOP mark facing you. If
mounting the camera to a wall, make
sure that TOP mark is also facing up.
Attach the mounting plate to the
surface using the mounting plate
screws (4x).
NOTE: Acceptable mounting surfaces
for wall/ceiling mounts are as follows:
• Concrete wall/ceiling.
• Plasterboard wall/ceiling.
• Solid board wall/ceiling.
NOTE: Use the included drywall anchors if installing in drywall.
2. Make sure the hinge screw (1x) is
attached to the back of the
camera.
1
Mounting
plate
Mounting screw holes
2
Camera Installation
TOP
Hinge screw
7
Advertisement
Table of Contents
