Url Record; Ldap - TIPTEL IP 286 Manual

Enterprise IP Phone
Base Mode: Pressing the DSS key which is set to be Hot Desking when the phone is

idle to active the Base Mode. By this mode, it will clear all of the account records, then
set up an account and register for the first account.
Advanced Mode: By this mode, it will clear the first account information, then

connect the URL to download the Xml file and configure a new account.
To assign the key as Hot Desking:
1) Choose Phone->DSS Key->Memory Key or Line Key, choose one of the keys you
want to make the assignment, there is a pull-down menu in the Type field, choose
Hot Desking option from the list.
2) In the "Value" field, enter the URL address in the input field to active the advanced
mode. Or you can leave it black to active the base mode.
3) Press Confirm button to save the changes.

URL Record

During the conversation, pressing the type of DSS key, and then follow the voice
prompts to achieve the call recording capability.
1) When you are on the conversation, pressing the DSS key to start the recording
process in the current Call.
2) Enable the recording function, the recording icon will be flashing for the ongoing
recording process.
3) Pressing the DSS key again to disable the recording function, and the flashing
recording icon will be disappeared simultaneously.
4) Follow the voice prompts to listen to the recording.
To assign a DSS key as URL Record:
3) Choose Phone->DSS Key->Memory Key or Line Key, choose one of the keys you
want to make the assignment, there is a pull-down menu in the Type field, choose
URL Recorder from the list.
4) Enter the condition code in the Value field.
5) Press Confirm button to save the changes.
Note:
During a conversation, press this type of DSS key to start the recording process; if the
other party hung up, your phone will turn to the idle status.

LDAP

If you want to use the LDAP function, you must configure the corresponding options in
the LDAP interface at first.
To assign the key as LDAP:
1) Choose Phone->DSS Key->Memory Key or Line Key, choose one of the keys you
want to make the assignment, there is a pull-down menu in the Type field, choose
LDAP from the list.
Using the Advanced Phone Functions