Hold; Dnd; Redial; Call Return - TIPTEL IP 286 Manual

Enterprise IP Phone
the transfer button.
3) Press Confirm button to save the changes.

Hold

The key can be configured as a hold key. You can use this key to hold and retrieve a call
during the conversation.
To assign the key as Hold:
1) Choose Phone->DSS Key->Memory Key or Line Key, choose one of the keys you
want to make the assignment, there is a pull-down menu in the Type field, choose
Hold from the list.
2) Press Confirm button to save the changes.

DND

If the key is configured as DND key, you are allowed to active the DND function
immediately when you press it. Press it again to deactivate DND mode.
To assign the key as DND:
1) Choose Phone->DSS Key->Memory Key or Line Key, choose one of the keys you
want to make the assignment, there is a pull-down menu in the Type field, choose
DND from the list.
2) Press Confirm button to save the changes.

Redial

If the key is configured as Redial key, press this key under the idle status, it will enter
the Dialed Calls interface, then you can choose a special line to call out by pressing the
line keys.
To assign the key as Redial:
1) Choose Phone->DSS Key->Memory Key or Line Key, choose one of the keys you
want to make the assignment, there is a pull-down menu in the Type field, choose
Redial from the list.
2) Press Confirm button to save the changes.

Call Return

When the key is configured as Call Return key you are allowed to dial out the last phone
call you received.
To assign the key as Call Return:
1) Choose Phone->DSS Key->Memory Key or Line Key, choose one of the keys you
want to make the assignment, there is a pull-down menu in the Type field, choose
Call Return from the list.
2) Press Confirm button to save the changes.
Using the Advanced Phone Functions