3-Way Conference; Network Conference - TIPTEL IP 286 Manual

Enterprise IP Phone
out.
2) After C answered it, A and C can have a private conversation without B hearing,
then A press the TRAN button to complete the transfer.
3) A will be disconnected from the call. B can talk to C.
To Semi-Attended Transfer via phone interface:
1) A and B is on an conversation, A press the TRAN button or Transfer hot key to put
B on hold, then A can dial a new number C（or press Directory soft key to enter the
contact list, then choose a record）and press the OK or SEND button to call out.
2) While C is ringing, A hang up or press the Transfer hot key. Then A will turn to hold
status, and the LCD will display as Transferred.
3) You will be disconnected from the call, when C pick up, B can talk to C.
Note:
Make sure that the SIP server you have registered supports this function.

3-way Conference

You can establish a three-party conference, during the conversation three phone
parties can communicate with each other.
To establish a conference:
1) Press the Conf hot key during an active call.
2) The first call is placed on hold. You will hear a dial tone. Dial the number to
conference in（or press Directory soft key to enter the contact list, then choose a
contact to conference in）, then press the Send hot key.
3) When the call is answered, you can have a private conversation at first. And then
press the CONF button, the conference call will include you and the other two
parties.
4) During the conference, press the Split hot key to split the conference into two hold
lines, and press the Resume hot key to resume the chosen call respectively.
5) When you press the hold key, the conference will be on hold.
6) Hang up to disconnect all parties.

Network Conference

If you want to make a conference with more than three people, you can open the
function of network conference.
If you enabled this function, you can put the meeting conference on the server.
To enable network conference via web interface:
1) Choose Account->Account X->Advance->Conference Type, there is a pull-down
menu, choose network from the list.
2) Enter the Conference URI.
3) Press Confirm button to save the changes.
Using the Basic Call Functions