Call Hold; Call Waiting - TIPTEL IP 286 Manual

Enterprise IP Phone

Call Hold

This call function allows you to place an active call on hold. In this case your IP PBX
might play a melody or message to the other party while waiting. Other calls can be
received and made while having a call on hold.
To hold/retrieve a call:
1) Press the HOLD button or Hold hot key to put your active call on hold.
2) During the call, there will be a "dodo.." sound for each 30 second, suggesting that
there is a current call in Hold state.
3) If there is only one call on hold, press the Resume hot key or Hold button to retrieve
the call.
4) If there are more than one call on hold, press the line button and the Up/Down
button to highlight the call, then press the Resume hot key or HOLD button to
retrieve the call.
Note:
When you are under the call hold status, putting down the handset, the conversation
will go on over the speaker instead of hanging up the call.

Call Waiting

This call feature allows your phone to accept other incoming calls to the extension no
matter under which circumstances.
To enable/disable Call Waiting via Phone interface:
1) Press Menu->Features->Call Waiting->Enter hot keys.
2) Use the navigation keys or Switch hot key to enable/disable the call waiting option.
3) Use the navigation keys or Switch hot key to enable/disable the Play Tone option.
This option used to define whether to play ring tones when there is call incoming
during an active call.
4) Press Save hot key to save the changes, or Back to return to the previous menu.
To enable/disable Call Waiting via Web interface:
Choose Phone->Features->Call Waiting option to do the relating changes.
Using the Basic Call Functions