Connecting To The Computer - AVM FRITZ!Box Fon WLAN 7113 Installation, Configuration And Operation

Connecting to the computer

Connecting
3.3 Connecting to the computer
Properties
FRITZ!Box Fon WLAN 7113
Set aside the power supply unit out of the FRITZ!Box
package.
1. Connect the power supply unit to the socket on the
FRITZ!Box labeled "Power".
2. Plug the other end into an AC power outlet.
The green "Power/DSL" LED will light up after a few sec-
onds to indicate that the device is ready for operation.
If you would like to surf the web using the FRITZ!Box or to
open the FRITZ!Box user interface, then you must connect
a computer with the FRITZ!Box.
A computer can be connected with the FRITZ!Box in two
different ways:
via a LAN port
wirelessly via WLAN
Note the following when connecting computers to the
FRITZ!Box:
One computer can be connected to the FRITZ!Box by
only one of these means.
At each of the network ports of the FRITZ!Box, a com-
puter can be connected directly or via a hub/switch.
Using WLAN you can connect multiple computers wi-
th the FRITZ!Box at the same time.
The way a computer is connected to the FRITZ!Box is
the same regardless of the operating system on the
computer.
All of the computers connected with the FRITZ!Box
constitute a network.
14