Ip Settings; Upnp Settings - AVM FRITZ!Box Fon WLAN 7113 Installation, Configuration And Operation

Avm fritz!box fon wlan 7113 installation, configuration and operation
Table of Contents

Advertisement

IP Settings

3.2
IP Settings
3.3

UPnP Settings

FRITZ!Box Fon WLAN 7113
The IP settings of the FRITZ!Box are preset upon delivery
with the following values:
Factory Settings
All computers are located in the
same IP network
IP address
Subnet mask
DHCP server
The IP address and the corresponding subnet mask yield
the following values:
Network address of the subnet 192.168.178.0
Entire IP address range for the
computers
The following addresses are reserved for certain purpo-
ses:
192.168.178.1
192,168,178,254
192,168,178,255
The Universal Plug-and-Play (UPnP) service included in
your FRITZ!Box provides status information about the
FRITZ!Box to all connected computers. Programs with
UPnP support on these computers can receive this infor-
mation and use them to display the status of the
FRITZ!Box (e.g., DSL synchronization, connection status,
data transmission). UPnP service thus allows you to moni-
tor your FRITZ!Box from a connected computer.
The FRITZ!DSL software receives status information from
the FRITZ!Box via UPnP.
enabled
192.168.178.1
255.255.255.0
enabled
192.168.178.2 -
192,168,178,253
is used by the FRITZ!Box itself
reserved for internal use
broadcast address used to send messag-
es into the network
90

Advertisement

Table of Contents
loading

Table of Contents