AVM FRITZ!Box Fon WLAN 7113 Installation, Configuration And Operation page 58

Avm fritz!box fon wlan 7113 installation, configuration and operation
Table of Contents

Advertisement

Check Security Software
FRITZ!Box Fon WLAN 7113
Check Security Software
The user interface cannot be displayed in the web
browser.
Possible Cause
Security software is blocking access to the user interface.
Remedy
Security software like firewalls can prevent access to the
user interface of the FRITZ!Box. Configure exceptions for
the FRITZ!Box in all of the enabled security software.
If you would like to exit security software to test access to
the FRITZ!Box, remove the DSL cable first! After testing,
first start the security software before reinserting the DSL
cable and connecting to the Internet!
Open the User Interface of the FRITZ!Box
The FRITZ!Box is equipped with a fixed IP address that
cannot be changed. FRITZ!Box always can be reached at
this IP address. This fixed IP address is:
Fixed IP Address
Proceed as follows to open the FRITZ!Box user interface
using this IP address:
1.
Connect the FRITZ!Box to the computer using the net-
work cable (yellow). See the section "Connecting
Computers to the LAN Port" from page 15 for more in-
formation.
2.
Make sure that the computer obtains its IP address
automatically. You can check this setting in the com-
puter's IP settings (see section "Obtain an IP Address
Automatically" from page 64).
3.
Restart your computer.
169.254.1.1
58

Advertisement

Table of Contents
loading

Table of Contents