Room Monitoring (Baby Monitor)
FRITZ!Box Fon WLAN 7113
Room Monitoring (Baby Monitor)
The following key combination enables the function for
monitoring the sound level in a room. First enter the vol-
ume level (a value between 1 and 8). Enter a telephone
number. Do not hang up the handset! When the volume in
the room reaches the specified level, the number you en-
tered will be dialed. When the telephone rings and you
pick up the handset, you will be connected with the tele-
phone on which you enabled the room monitoring func-
tion.
When using this feature, it is advisable to activate the
speaker phone function.
Enable Room Monitoring
N
Pick up the handset or activate the speaker
phone function of your telephone.
s4
Dial the sequence shown at left. For <Level>,
enter a number between 1 (the most sensi-
<level>
tive sound level) and 8. For <Number>, enter
s
the number to be called. This may be the
number of another internal extension, a 9
<number>
for an internal group call, or any external
r
number desired.
Q
Wait for the acknowledgement tone. The ba-
by monitoring phone function is now en-
abled.
Do not hang up the handset!
Dial the number of the extension to listen in at an exten-
sion with room monitoring activated.
After initiating a room monitoring phone call, the PBX can-
not generate a new call until at least one minute has
lapsed.
You can disable the function by simply hanging up the
handset of the telephone at which you enabled it.
51