Opening The User Interface; Password Protection - AVM FRITZ!Box Fon WLAN 7113 Installation, Configuration And Operation

Opening the User Interface

4 Opening the User Interface
fritz.box
The FRITZ!Box has a user interface that can be used in a web browser.
The user interface presents information about the FRITZ!Box product,
terminals and connections. This is where you configure all of the set-
tings for operating the FRITZ!Box.
Starting
4.1

Password Protection

FRITZ!Box Fon WLAN 7113
The user interface can be opened from any computer con-
nected with the FRITZ!Box. The settings you configure are
saved in the FRITZ!Box.
1. Start a web browser on your computer.
2. Enter "fritz.box"
The "fritz.box" address entry in the address field of an Internet
browser
The FRITZ!Box user interface opens.
If the user interface does not open, please see the in-
structions in the section "Errors Opening the User Inter-
face" on page 53.
Use the password protection set up for the user interface
to protect your settings and all information in the
FRITZ!Box from unauthorized access.
Here is how to set up the password protection in the
FRITZ!Box:
1. Open the FRITZ!Box user interface.
2. Select "Advanced Settings / System / FRITZ!Box
Password" in the FRITZ!Box Settings" area.
3. Enable password protection and enter a password.
4. Save your settings by clicking "Apply".
in the address line of the browser.
23