AVM FRITZ!Box Fon WLAN 7113 Installation, Configuration And Operation page 37

Alarm
Disabling the
function
FRITZ!Box Fon WLAN 7113
Enabling Do Not Disturb for a prescribed period
r80<Ext.>s
<Start>s<End>s
r91ss
r81<Ext.>s6s enables Do Not Disturb for the defined
Both kinds of Do Not Disturb settings can be disabled by
means of a keypad sequence.
Disabling Do Not Disturb
r81<Ext.>s6s disables Do Not Disturb for extension
Alarm
The FRITZ!Box includes an alarm function. The alarm can
be configured individually for each connected telephone.
First enter on the telephone the time at which you would
like to be awakened and save this entry. Then enable the
alarm function.
Example: The telephone should ring at 07:00 a.m. Enter
the value "0700" as the <Time> and save this setting.
Configuring the Alarm for a Telephone
r881s<time>s
<Ext.>s
r91ss
Enabling/disabling the alarm function
r881ss
r881r
defines the period for Do Not Disturb at
extension <Ext.>
saves the settings
period.
<Ext.>
defines for the extension <Ext.> the
time at which the telephone should
ring
saves the settings
enables the alarm function for all ex-
tensions on which a time was set
disables the alarm function for all ex-
tensions
37