Leds - AVM FRITZ!Box Fon WLAN 7113 Installation, Configuration And Operation

LEDs

1.2 LEDs
LED Status
Power/DSL lights up
flashes
Internet lights up
flashes
Fixed lights up
Line
flashes
WLAN lights up
flashes
INFO lights up
flashes
flashes red
FRITZ!Box Fon WLAN 7113
Five LEDs are built into the top of the FRITZ!Box Fon
WLAN 7113, which flash or light up to display various con-
nection statuses.
Meaning
FRITZ!Box on standby
the device has electrical power and the DSL line is ready
for operation
the device has electrical power
the connection to DSL is being established or has been
interrupted
a telephone connection to the Internet is active
there are messages in your mailbox (this function must be
supported by your telephony carrier)
a telephone connection via the telephone line is active
there are messages in your mailbox (this function must be
supported by your telephony carrier)
the WLAN function is enabled
the WLAN function is being enabled or disabled
a telephone connection between two Internet telephony
subscribers is active; the call is free of charge (this func-
tion must be supported by your Internet telephony pro-
vider)
signals an event that can be configured freely by the us-
er
updating the firmware
the value specified for the online meter has been
reached
signals an event that can be configured freely by the us-
er
An error occurred – open the FRITZ!Box user interface and
follow the instructions in the overview
72