Table of Contents
Advertisement
Changing the Network Settings
Factory Settings
3.7
Changing the Network Settings
FRITZ!Box Fon WLAN 7113
Upon delivery the interfaces of the FRITZ!Box are config-
ured as follows:
Interface
IP Address
LAN
192.168.178.1 255.255.255.0 enabled
WLAN
192.168.182.1 255.255.255.0 enabled
Thus the following address pools are available to the
DHCP server:
Interface
Address pool of the DHCP server at the
interface
LAN
192.168.178.20 - 192,168,178,200
WLAN
192.168.182.20 - 192,168,182,200
Computers connected with the FRITZ!Box via different in-
terfaces are located in different IP networks.
Interface
network address of the IP network
LAN
192.168.178.0
WLAN
192.168.182.0
In order to change the network settings of the FRITZ!Box,
the Expert Mode must be enabled in the user interface:
1.
Start a web browser on your computer and enter
fritz.box
in the address line of the browser.
2.
Select the "Advanced Settings / System" menu in the
"Settings" area.
3.
Click "Expert Mode" in the System menu, enable the
setting "Show expert setting"s and confirm this
setting by clicking "Apply".
Subnet mask
94
DHCP server
Advertisement
Table of Contents
