AVM FRITZ!Box Fon WLAN 7113 Installation, Configuration And Operation page 81

WLAN Radio Network Name (SSID)
FRITZ!Box Fon WLAN 7113
If your WLAN adapter supports WPA2 in accordance
with the 802.11i standard:
– Enable WPA encryption.
– Select the WPA mode "WPA2 (CCMP)" or
"WPA+WPA2".
– Replace the WPA network key with a new, unique
value.
If your WLAN adapter supports the WPA mechanism,
but not the WPA2 mechanism:
– Enable WPA encryption.
– Select the
"WPA+WPA2".
– Replace the WPA network key with a new, unique
value.
If your WLAN adapter supports neither the WPA nor
the WPA2 mechanism:
– Enable WEP encryption.
– Replace the WLAN key with a new, unique value.
We strongly recommend the use of a WLAN adapter that
supports WPA or WPA2 (for instance, the FRITZ!WLAN USB
Stick). WEP is out of date and data encrypted with WEP
can be deciphered within minutes.
WLAN Radio Network Name (SSID)
In the factory settings of FRITZ!Box a value of "FRITZ!Box
Fon WLAN 7113" is preset for the SSID (Service Set Identi-
fier).
If an additional device with the same network name is lo-
cated in the vicinity, it can occur that the WLAN adapter
attempts to register there. Therefore you should change
the SSID as soon as possible.
WPA mode
81
"WPA (TKIP)" or