Dhcp Server - AVM FRITZ!Box Fon WLAN 7113 Installation, Configuration And Operation

DHCP Server

3.5 DHCP Server
FRITZ!Box Fon WLAN 7113
The FRITZ!Box is equipped with its own DHCP server. The
DHCP server is enabled by default in the factory settings.
The following range of IP addresses is reserved for the
DHCP server in the factory settings:
192.168.178.20 - 192,168,178,200
This IP address can be changed as needed.
Every time the operating system on a computer connected
with FRITZ!Box is started, the DHCP server assigns it an IP
address from the IP address range of the DHCP server.
Only one DHCP server may be active within any network.
Assigning the IP addresses via the DHCP server ensures
that all of the computers connected with the FRITZ!Box are
located in a single subnet.
The computers can receive their IP addresses from the
DHCP server only if the setting "Obtain an IP address au-
tomatically" is enabled in the their IP settings. For more
information, see the section "Obtain an IP Address Auto-
matically" from page 64.
Fixed IP Addresses when the DHCP Server Is Enabled
If you would like to configure fixed IP addresses on indi-
vidual computers connected with the FRITZ!Box despite
the enabled DHCP server, please note the following:
The IP addresses must be from the IP network of the
FRITZ!Box.
The IP addresses may not come from the address
range of the DHCP server.
Each IP address can be assigned only once.
92