Chapter 10 Checking The Connected Devices; Turning On The Devices; Checking The Luns - Fujitsu Eternus Server Connection Manual

Chapter 10 Checking the Connected Devices

10.1

Turning on the Devices

To turn on the connected devices, use the following procedures:
1
2
3
4
5
10.2

Checking the LUNs

Check the LUNs using the following procedures.
1
2
P3AM-2922-05ENZ0 ETERNUS Disk storage systems Server Connection Guide (Fibre Channel) for Windows®
Procedure
Turn on the Fibre Channel switch power (if used).
Check that the Ready LED (or equivalent) is lit on the Fibre Channel switch.
Turn on the ETERNUS Disk storage system.
Check that the Ready LED is lit on the ETERNUS Disk storage system.
Turn on the server.
Procedure
Open [Device Manager] to show [Disk drives].
If the ETERNUS Disk storage systems' LUNs are recognized by the server, the
ETERNUS Disk storage systems' device (LUNs) are displayed under [Disk
drives].
27
End of procedure
End of procedure
Copyright 2010 FUJITSU LIMITED