Chapter 9 Checking The Connected Devices; Turning On The Devices; Checking The Luns - Fujitsu ETERNUS DX Configuration Manual

Chapter 9
Checking the Connected Devices
9.1

Turning On the Devices

To turn on the connected devices, use the following procedure:
1
Turn on the ETERNUS DX.
2
Check that the Ready LED is lit on the ETERNUS DX.
3
Turn on the server.
9.2

Checking the LUNs

Check the LUNs using the following procedure:
1
Open [Device Manager] to show [Disk drives].
2
If the ETERNUS DX storage systems' LUNs are recognized by the server, the ETERNUS DX storage sys-
tems' device (LUNs) are displayed under [Disk drives].
For multipath configuration with Windows Server
R2, Windows Server
shows as a single "Multi-Path Disk Device".
®
2012, Windows Server
FUJITSU Storage ETERNUS DX Configuration Guide -Server Connection- (SAS) for Windows
Copyright 2020 FUJITSU LIMITED
®
2019, Windows Server
®
2008 R2, or Windows Server
26
® ®
2016, Windows Server 2012
®
2008, each ETERNUS DX LUN
®
P3AM-3442-18ENZ0