Fujitsu Eternus Server Connection Manual page 24

Chapter 8 Installing Drivers
> 8.2 Multipath Environment Configuration
2
3
4
P3AM-2922-05ENZ0 ETERNUS Disk storage systems Server Connection Guide (Fibre Channel) for Windows®
In the MPIO properties window, select the [MIPO-ed Devices], and click the
[Add] button.
Enter the ID of the ETERNUS Disk storage system that is to be connected in the
[Device Hardware ID] field.
Enter the ID as follows;
For ETERNUS2000: FUJITSU E2000
For ETERNUS4000: FUJITSU E4000
For ETERNUS8000: FUJITSU E8000
A space is required between the "FUJITSU" and the "E_...".
Connect the ETERNUS Disk storage system using multipath configuration with
the server turned off, and then turn the server on.
24
End of procedure
Copyright 2010 FUJITSU LIMITED