Chapter 1 Workflow - Fujitsu Eternus Server Connection Manual

Chapter 1
This chapter describes how to connect the ETERNUS Disk storage systems to a Windows®
server.
Workflow
P3AM-2922-05ENZ0 ETERNUS Disk storage systems Server Connection Guide (Fibre Channel) for Windows®
Workflow
ETERNUSmgr Installation and ETERNUS Disk storage systems' Setup
If the ETERNUSmgr is to be used, install it and set up the ETERNUS Disk storage system.
Refer
-
"Chapter 4 Installing and Setting Up ETERNUSmgr" (page 18)
-
"Chapter 5 Setting Up the ETERNUS Disk Storage Systems" (page 19)
-
Install ETERNUSmgr.
•
"ETERNUSmgr Install Guide"
-
Check ETERNUSmgr operation.
•
"ETERNUSmgr User Guide"
-
Set up the ETERNUS Disk storage system.
•
"ETERNUS Disk storage systems Server Connection Guide (Fibre Channel)
ETERNUS Disk Storage System Settings"
Fibre Channel Switch Setup
If a Fibre Channel switch is to be used, set it up and connect it now.
Refer
-
"Chapter 6 Setting the Fibre Channel Switches" (page 20)
-
Set up the Fibre Channel switch.
•
"ETERNUS Disk storage systems Server Connection Guide (Fibre Channel) Fibre
Channel Switch Settings"
-
Check the Fibre Channel switch connection requirements.
•
"Server Support Matrix for FC-SWITCH"
9
Copyright 2010 FUJITSU LIMITED