Fujitsu Eternus Server Connection Manual page 10

Chapter 1 Workflow
>
P3AM-2922-05ENZ0 ETERNUS Disk storage systems Server Connection Guide (Fibre Channel) for Windows®
Driver Installation
Install the appropriate driver for the Fibre Channel card and Multipath Driver to be used.
Refer
-
"Chapter 8 Installing Drivers" (page 22)
-
Install and set up the card and driver.
•
"ETERNUS Disk storage systems Server Connection Guide (Fibre Channel) for
Windows® Driver Settings for PRIMERGY/PRIMEQUEST 1000 Series"
•
"ETERNUS Disk storage systems Server Connection Guide (Fibre Channel) for
Windows® Driver Settings for PRIMEQUEST 500/400 Series"
•
"ETERNUS Disk storage systems Server Connection Guide (Fibre Channel) for
Windows® Driver Settings for Emulex Fibre Channel Cards"
•
"ETERNUS Disk storage systems Server Connection Guide (Fibre Channel) for
Windows® Driver Settings for QLogic Fibre Channel Cards"
-
Check the Fibre Channel card driver versions.
•
"Server Support Matrix"
Connected Devices Check
Check the ETERNUS Disk storage system LUNs and status of the connection to the
server.
Refer
-
"Chapter 10 Checking the Connected Devices" (page 27)
Operation-related Preparation
Create disk partitions and set up the cluster configuration as necessary.
Refer
-
"Chapter 11 Creating the Disk Partitions" (page 29)
-
"Chapter 12 Setting Up the Cluster Configuration" (page 30)
10
Copyright 2010 FUJITSU LIMITED