Reviewing And Searching When Recording - Canon MV920 Instruction Manual

Reviewing and Searching when Recording

Record Review
In record pause mode, this function allows you to review the last few seconds of your
recording to check if it has been recorded properly.
1. Set the program selector to
2. If the joystick guide does not appear on screen,
press (
3. Push the joystick (
release it.
The camcorder rewinds the tape, plays back the last few
seconds, and returns to record pause mode.
Record Search
In record pause mode, this function allows you to play back the tape (forward or reverse)
to locate the point where you wish to begin recording.
1. Set the program selector to
2. If the joystick guide does not appear on screen,
press (
3. Hold the joystick pushed (
back towards the beginning of the recording or
pushed (
the end of the recording.
• Release the joystick at the point where you wish to begin recording.
• The camcorder returns to record pause mode.
Downloaded From VideoCamera-Manual.com Manuals
20
Joystick
) to display it.
) momentarily towards
) to display it.
) towards to search forward towards
.
.
) towards to search
Program selector
and
EXP
FOCUS
EXP
FOCUS