Under Linux:
1. Open the Dialogic
interface
2. Click Board configuration and select the Dialogic
Board you want to configure.
3. In the Board Configuration - Detail select your country-specific
protocol from the dropdown menu next to D-Channel Protocol.
Note: The above graphic shows the parameters and values for a Diva
Analog Media Board configuration. The available D-channel protocols
depend on the installed Diva Media Board. The menu options for Diva BRI
and PRI Media Boards are slightly different as well.
•
These products do not perform automatically repeated call attempts;
however, they do not include protection against repeated call requests from
the controlling application software.
•
To meet the requirements of TBR 21 § 4.8.3, the application software shall
not submit call requests that violate the following rules:
• The number of repeated call attempts [to the same number] is
restricted to 15.
• The interval between subsequent call attempts [to the same number]
is at least 5 seconds.
Dialogic® Diva® Media Board Installation Guide
®
®
Diva
Linux System Release software web
®
®
Diva
Media
page 59