Dialogic Diva Installation Manual page 28

Installation
®
Note for Dialogic Diva
Diva V-4PRI PCIe HS, and Diva V-4PRI PCIe FS Media Boards:
Diva V-xPRI PCIe HS and the Diva V-4PRI PCIe FS Media Boards have four
ports. The "x" or the "4" stand for the activated ports; that means one port
is activated on the Diva V-1PRI HS Media Board, two ports on the Diva V-2PRI
HS Media Board, and four ports on the Diva V-4PRI PCIe HS and Diva V-4PRI
PCIe FS Media Board. You can use only the activated ports, which are shown
in the graphic below. The diagram is oriented with the edge connector pointing
downwards. Typically, you must specify the port number during software
configuration. Connect the cables as described above.
Diva V-1PRI HS Diva V-2PRI HS
Media Board Media Board
Port 1
Note: Diva V-1PRI PCIe HS, V-2PRI PCIe HS, V-4PRI PCIe HS, and V-4PRI
PCIe FS Media Boards do not supply the function of the CSU or DSU internally.
You need to purchase it from an independent distributor.
Diva V-8PRI PCIe FS Media Board
Diva V-8PRI PCIe FS Media Boards have four RJ45 ports for connecting four
dongles. The dongles have two ports each for connecting two separate PRI
lines; therefore, you can connect to up to eight PRI lines. You can use any
port; typically, you must specify the port number during software
configuration. The port numbers are shown below. The diagram is oriented
with the edge connector pointing downwards.
page 28
®
V-1PRI PCIe HS, Diva V-2PRI PCIe HS,
Diva V-4PRI HS
Media Board
Port 1
Port 1
Port 2
Port 2
Port 3
Port 4
Port 1 and Port 5
Port 2 and Port 6
Port 3 and Port 7
Port 4 and Port 8
Diva V-4PRI FS
Media Board
Port 1
Port 2
Port 3
Port 4