Dialogic Diva Installation Manual page 40

Troubleshooting
® ®
Dialogic Diva V-1PRI PCIe HS, V-2PRI PCIe HS,
V-4PRI PCIe HS Media Boards
Diva V-xPRI PCIe HS Media Boards have multifunctional LEDs:
Note: On Diva V-1PRI PCIe HS and Diva V-2PRI PCIe HS Media Boards, not
all ports are activated. See the note on page 28 for more information.
The table below describes the function of each LED:
Color Status
green off Layer 2 is not active. Check your layer 2 configuration, i.e., switch
type, switch etc.
lit Layer 2 is active. If your Dialogic
properly, layer 2 is always active.
yellow off Normal operation.
lit Remote site is experiencing synchronization problems (if a remote
alarm/yellow alarm is detected).
red off Normal operation.
lit The receiver does not detect a signal (loss of signal/red alarm).
page 40
Diva V-1PRI PCIe HS
Diva V-2PRI PCIe HS
Diva V-4PRI PCIe HS
green or yellow
red
Description
® ®
Diva Media Board works