Ricoh 9050b Operating Instructions Manual page 164

4. Troubleshooting When Using the Printer Function
Message
"Authentication has failed."
"Authentication has failed."
"Cannot connect with the
wireless card. Turn the main
power switch off, then check
the card."
4
"The selected file(s)
contained file(s) without
access privileges. Only file(s)
with access privileges will be
deleted."
"The tray selected for other
pages is the same as the one
for Slip Sheets ([Designate]).
Cannot print. Check the
setting."
"Updating the destination
list... Please wait. Specified
destination(s) or sender's
name has been cleared."
60
Cause
The entered login user name
or login password is not
correct.
The machine cannot perform
authentication.
• The wireless LAN
interface unit was not
inserted when the
machine was turned on.
• The wireless LAN
interface unit was pulled
out after the machine
turned on.
• The settings are not
updated although the
unit is detected.
You have tried to delete files
without the authority to do so.
The tray selected for other
pages is the same as the one
for slip sheets.
The destination list is being
updated from the network
using SmartDeviceMonitor
for Admin or Web Image
Monitor.
Solution
Inquire the user administrator for the
correct login user name and login
password.
Contact the administrator.
Turn off the machine, and check the
wireless LAN interface unit is inserted
correctly. Then, turn the machine on
again. If the message appears again,
call your service representative.
Files can be deleted by the person who
created the file. To delete a file which
you are not authorized to delete, contact
the person who created the file.
Reset the job. Be sure the tray you select
for slip sheets is not providing paper for
other pages.
Wait until the message disappears. Do
not switch off the power while this
message is displayed. Depending on the
number of destinations to be updated,
there may be some delay before you
can resume operation. Operations are
not possible while this message is
displayed.