When An Indicator To The Right Of A Function Key Is Lit - Ricoh 9050b Operating Instructions Manual

1. When the Machine Does Not Operate As Wanted
When an Indicator to the Right of a Function Key
Is Lit
1
When an indicator to the right of a function key lights up, press the corresponding function key. Then, follow
the instructions displayed on the control panel.
If an error occurs in the function you are using, check the message that appears on the control panel, and
then refer to "Messages Displayed" for the relevant function.
Following describe the main reasons the indicator lights up.
Problem
Documents and reports do
not print out.
Documents and reports do
not print out.
An error has occurred.
The machine is unable to
connect to the network.
12
BBT051S
Cause
The paper output tray is full.
There is no paper left.
The function whose indicator
is lit is defective.
A network error has
occurred.
Solution
Remove the prints from the tray.
Load paper. See p.97 "Loading
Paper".
Record the code number shown on the
display and contact your service
representative. See "Messages
Displayed" of each chapter.
You can use other functions normally.
• Check the displayed message and
take an appropriate action. See
"Messages Displayed" of each
chapter.
• Check that the machine is correctly
connected to the network, and that
the machine is correctly set. For
details about how to connect the