Yardworks 060-3999-2 Instruction Manual page 26

26
model no. 060-3999-2 | contact us: 1-866-523-5218
STORAGE
1. Run the snow thrower for a few minutes in order to melt any snow that may be left on the snow
thrower.
2. Wipe the snow thrower off with a dry cloth before storage. This will help prevent ice building up on
the unit and parts freezing.
3. Disconnect the extension cord from the snow thrower.
4. Inspect the extension cord thoroughly for signs of wear or damage. Replace it if it is worn or
damaged.
5. Inspect the snow thrower thoroughly for worn, loose, or damaged parts. If any parts must be
repaired or replaced, contact the toll-tree helpline, at 1-866-523-5218.
6. Store the extension cord with the snow thrower.
7. Store the snow thrower in a clean, dry place. Cover it in order to provide added protection.