Yardworks 060-3999-2 Instruction Manual page 13

model no. 060-3999-2 | contact us: 1-866-523-5218
1. Inspect the extension cord and the power cord on a regular basis. Look for deterioration, cuts, or
cracks in the insulation. Inspect the connections for damage. Repair or replace the extension cord
or the power cord if any damage is found.
2. Verify that the impeller and all moving parts have come to a complete stop, and disconnect the
snow thrower from the power supply in order to prevent accidental start-ups before cleaning or
performing any inspections or repairs.
3. Do not abuse the extension cord. Do not carry the snow thrower by the power cord or pull on the
cord in order to disconnect it from the receptacle.
4. Keep the extension cord away from heat, oil, and sharp edges in order to prevent damage.
5. If the extension cord is damaged in any manner while it is plugged in, disconnect it from the outlet
immediately.
6. Prevent any possible disconnection of the power cord from the extension cord while the snow
thrower is in use by using the cord retainer. Refer to the section entitled Using the Cord Retainer.
7. Unplug the snow thrower and allow it to cool down before putting it into storage. Store the snow
thrower indoors.
8. Unplug the snow thrower when it is not in use and before performing any maintenance or repairs.
WARNING: Keep the extension cord clear of the working area.
!
Position the cord so that it will not get caught on lumber, tools, or
other obstructions while you are working with a power tool. Failure
to do so can result in serious personal injury.
13