Installing The Chute Control Rod - Yardworks 060-3999-2 Instruction Manual

16
model no. 060-3999-2 | contact us: 1-866-523-5218

INSTALLING THE CHUTE CONTROL ROD

1. Position the discharge chute (1) so that it faces forward.
NOTE: Align the arrow (2) on the discharge chute with the arrow on the housing.
2. Align the holes (3) on the upper chute control rod (4) with the holes on the lower chute control rod
(5). Insert the hitch pin (6). Insert the end of the chute control rod (7) through the keyed hole (8) in
the bracket that is attached to the top of the middle handle.
3. Ensure that the handle (9) of the chute control rod points upward, and insert the rod into the keyed
hole (10) in the back of the housing.
4. Firmly push the rod into the keyed hole in the back of the housing until it snaps into place.
5. Rotate the handle on the chute control rod to ensure that it moves in the same direction as the
chute.
8
1
7
4
3
5
2
6