Fig. 27. - Ptr2 Fixing Options - Fenix EPC1200 Operation Manual

APPENDIX H – PTR2
The PTR2 Stand-Alone Printer consists of an enclosed EPC1200 with an arm that allows attaching
the device to any vertical or horizontal surface. The enclosure and the arm are made of paint-coated
steel that gives the PTR2 toughness and prevents it from corrosion making the printer suitable for a
wide range of environments.
The PTR2 incorporates a detaching system that allows the printer to rotate around its fixing point in
up to 20 positions and be secured again with no additional tools.
Fig. 27. – PTR2 Fixing Options
EPC1200 SERIES OPERATION MANUAL
55/56