APPENDIX A – SPECIFICATIONS
Printing
Printing method
Dot density
Printing direction
Printing width
Print speed
Paper feed speed
Character
Character per line (default)
Character spacing (default)
Character structure
Character size (mm)
Character number
Line spacing (default)
Paper
Paper roll
Thermal paper type
Communications Interface (compatible)
Buffer
Receive buffer
Barcode
Barcode Specs
Power
Power supply
Peak current consumption
(64 dots activated)
Operating
Life span (at 25ºC )
Activation pulse resistance
Abrasion resistance
Temperature
Physical
Overall dimensions (mm)
Weight (without paper)
EPC1200 SERIES OPERATION MANUAL
Thermal line printing
203 dpi x 203 dpi; 8 dots x mm
(dpi = dots per inch. Inch = 25.4mm)
Unidirectional with friction feed
48 mm (384 dots)
High speed mode: up to 90 mm/s (50mm/s on the
EPC1250)
Printing speed could change depending on the
print head temperature as well as the command
processing and the data transmission speed.
90 mm/s (50mm/s on the EPC1250)
Font A: 42
Font B: 56
0.5 mm (4 dots)
Font A:
12 x 24 dots (1.5 x 3 mm).
Font B:
8 x 16 dots (1 x 2 mm).
Font A is the default.
Font A
Standard:
1.5 x 3
Double-width:
3 x 3
Double-height:
1.5 x 6
Double width/height:
3 x 6
Alphanumeric characters:
Extended Graphics:
0.99 mm
Width: 58 +0/-1mm, (25 m approx.)
Maximum outside diameter: 45 mm
At –5ºC to 50ºC
TF50KS-E2D
TF77KS-E2 (95μm paper)
TL69KS-HG76
TL51KS-R2 and TL69KS-R2
(high heat-resistant paper)
At 5ºC to 40ºC
TW80KK-S (2-ply thermal
paper)
From Nippon Paper Industries
Serial RS-232C / TTL
Parallel IEEE 1284
(Nibble mode)
10 Kbytes
EAN-13, CODE39, ITF, CODE128
5VDC+10%-5% or 12-24VDC ± 10%
5.5A (5VDC), 1.8A (24VDC) or 1.1A (12VDC)
100 millions pulses or more (print ratio=12'5%).
50 Km or more.
Operating: 0 to 50ºC
Storage:
-20 to 70ºC, without paper.
108 x 68 x 90 (W x D x H)
170g
EPC1200
PTR2
670g (approx.)
Font B
Standard:
1 x 2
Double-width:
2 x 2
Double-height:
1 x 4
Double width/height: 2 x 4
95
128 per page
(59μm paper )
(label paper)
USB V2.0 Full Speed
512K
on
the
USB
model
43/56
Need help?
Do you have a question about the EPC1200 and is the answer not in the manual?