Esc J; Print And Feed Paper X; Esc M; Select Character Font X - Fenix EPC1200 Operation Manual

[Name] Print and feed paper
[Format] ASCII
Hex
Decimal
0 ≤ n ≤ 255
[Range]
[Description] Prints the data in the print buffer and feeds the paper [n x 0.125 mm (0.0049")].
[Notes]
• After printing is completed, this command sets the print starting position to the
beginning of the line.
• The paper feed amount set by this command does not affect the values set by ESC
2 or ESC 3.
• The printer uses the vertical motion unit (y).
ESC M n
[Name] Select character font
[Format] ASCII
Hex
Decimal
[Range] n = 0, 1
[Description] Selects the character font.
n
0
1
[Notes]
• ESC ! can also select character font types. However the setting of the last received
command is effective.
• This command must be sent at the beginning of a line. If it is sent in the middle of a
line, all previous data in the print buffer is printed and the ticket is placed at the
beginning of the next line.
[Reference]
ESC !, APPENDIX A
ESC a n
[Name] Select justification
[Format] ASCII
Hex
Decimal
0 ≤ n ≤ 2, 48 ≤ n ≤ 50
[Range]
[Description] Aligns all the data in one line to the specified position
n selects the justification as follows:
n(Hex)
0, 30
0, 31
0, 32
[Notes]
• The command is enabled only when processed at the beginning of the line.
• This command executes justification in the printing area.
[Reference]
ESC !
[Example]
Left justification
ABC
ABCD
ABCDE
ESC c 3 n

ESC J

n
1B 4A
n
27 74
n

ESC M

n
1B 4D
n
27 77
n
Function
Character Font A (12 x 24) selected
Character Font B (8 x 16) selected

ESC a

n
1B 61
n
27 97
n
n (Dec) Justification
0, 48 Left justification
0, 49 Centering
0, 50 Right justification
EPC1200 SERIES OPERATION MANUAL
Centering
ABC
ABCD
ABCDE
Right justification
ABC
ABCD
ABCDE
33/56