Connecting The Alarm Output; Power Supply - Bosch DIVAR AN 5000 Operation Manual

DIVAR AN 3000 / DIVAR AN 5000
5.10.2

Connecting the alarm output

Danger!
Electrical voltage
Risk of electric shock and damage to the unit.
The contacts must not be used at AC line voltages.
The alarm output relays respond to input alarms and triggers. Only connect resistive loads to
the alarm output relays. To avoid overloading, always make sure the relay has the following
specifications.
Relay Specification
Model
Touch material
Rating (resistance load)
5.11

Power supply

DIVAR AN 3000
DC power is supplied from an AC/DC power supply unit delivered with the unit. The unit has
its own on/off switch to turn power supply off and on.
Specifications:
–
–
DIVAR AN 5000
Power is supplied from an AC power supply. The unit has its own on/off switch to turn power
supply off and on.
Specifications:
Power supply: AC input: 100-240 VAC; 1.7 A; 50/60 Hz
Bosch Security Systems
External power supply unit:
– AC input: 100-240 VAC; 1.7 A; 50/60 Hz
– DC output: 12 VDC; 5 A
DIVAR power input: 12 VDC; 3.5 A
JRC-27F
Silver
Rated switch capacity
Maximum switch power
Maximum switch voltage
Maximum switch current
Operations Manual
Hardware setup | en
30 VDC, 2 A; 125 VAC, 1 A
125 VA, 160 W
250 VAC, 220 VDC
1 A
2015.02 | 2.1 | AM18-Q0669
35