Table of Contents
Advertisement
Divar - Easy | Installation Manual | Quick install
>> RECORDING SETTINGS
RECORDING SETTINGS
DAY PERIOD
WEEKEND
REC DAY
REC NIGHT
REC WEEKEND
ENABLE ALARM INPUTS FOR
ALARM INPUT RECORDING
ENABLE MOTION FOR
MOTION RECORDING
APPROX. REC. DURATION
>> DAY PERIOD
•
Fill in a start time and an end time to define the period during which the
day profile is active.
•
The weekend/night profile is active for the rest of the 24-hour period.
>> WEEKEND
•
When a day is defined as a weekend day, then the weekend/night profile
is active that whole day.
•
Define the weekend as either Saturday and Sunday or just Sunday.
•
Select none if you wish the weekend to be the same as the other days of
the week.
>> REC DAY
•
Select the normal recording speed to be used for each of the activated
cameras during the day profile.
•
The Images Per Second (IPS) rates available for PAL range from 0, 1⁄10
(one image every 10 seconds), up to 25 IPS.
•
The Images Per Second (IPS) rates available for NTSC range from 0, 1⁄10
(one image every 10 seconds), up to 30 IPS.
Bosch Security Systems
8:00
18:00
SAT AND SUN
1 IPS/CAM
2 IPS/CAM
2 IPS/CAM
DAY/NIGHT
12.5 IPS/INPUT
NIGHT
1
2
3
4
5
6
7
8
9 10 11 12 13 14 15 16
5 IPS/CAM
036 HOURS
>> REC NIGHT
•
Select the normal recording speed to be used for each of the activated
cameras during the night profile.
•
The Images Per Second (IPS) rates available for PAL range from 0, 1/10
(one image every 10 seconds), up to 25 IPS.
•
The Images Per Second (IPS) rates available for NTSC range from 0, 1⁄10
(one image every 10 seconds), up to 30 IPS.
>> REC WEEKEND
•
Select the normal recording speed to be used for each of the activated
cameras during the weekend profile.
•
The Images Per Second (IPS) rates available for PAL range from 0, 1⁄10
(one image every 10 seconds), up to 25 IPS.
•
The Images Per Second (IPS) rates available for NTSC range from 0, 1⁄10
(one image every 10 seconds), up to 30 IPS.
>> ENABLE ALARM INPUTS FOR
•
Select the profiles during which alarm inputs are enabled.
•
Choose day only, weekend/night only, both day and weekend/night or
none.
>> ALARM INPUT RECORDING
•
An activated input alarm can increase the recording speed of a camera.
Select the recording speed to be used when an input is activated.
•
The camera with the number that corresponds to the alarm input
number is recorded at the speed you set.
>> ENABLE MOTION FOR
•
Select the profiles during which motion events are enabled Choose day,
weekend/night, both day and weekend/night or none.
•
Press the camera keys to select or deselect the cameras for which motion
should be enabled. A check mark means enabled.
>> MOTION RECORDING
•
A camera can be recorded at an increased recording speed when motion
is detected. Select the recording speed to be used for each of the cameras
when motion is detected.
EN | 2-5
Advertisement
Table of Contents
