Customized Option; About Customization Options - Yaesu FTDX9000MP Operation Manual

With regard to the FT 9000MP, the addition of one or more of the customization options can elevate performance of the
DX
basic transceiver to a higher level. Additionally, you may configure the level of performance that fits the requirements of
your station, as well as your personal tastes and preferences. Because these options are delicate, high-technology devices,
please contact WDXC regarding the latest information regarding installation of any options inside your FT
RF μ-Tuning Units
( MTU-160, MTU-80/40, MTU-30/20 )
On the 14 MHz and lower bands, the μ-Tuning Units
provide extraordinarily high Q; the resulting steep shape
factor is a powerful aid for reducing off-frequency in-
terference. Separate modules are available for the 1.8
MHz, 3.5/7 MHz, and 10.1/14 MHz bands, and they
may be installed on the Main Receiver only (not in the
RXU-9000).
Thanks to the large (1.1"/28 mm) inductor through
which a stack of ferrite cores is adjusted, the band-
width of the μ-Tuning (±12.5 kHz) provides unmatched
protection for the receiver front end and following cir-
cuits.
FT 9000MP O
DX PERATION
A C
BOUT USTOMIZATION
M
ANUAL
C C C C C
UST UST OMIZED UST OMIZED OMIZED OMIZED
UST UST OMIZED
O
PTIONS
TFT Display Unit ( TFT-9000 )
The TFT-9000 TFT Display Unit allows the radio dis-
play the World Clock, Spectrum Scope, Audio Scope/
Oscilloscope, Logbook, Rotator Control, and Tempera-
ture/SWR Status Display information on an internal
6.5" TFT Display, which features 800 x 480 dot reso-
lution for easy viewing and remarkable clarity.
O O O O O
PTION PTION PTION
PTION PTION
9000MP.
DX
Page 165