Vfo Tracking Feature - Yaesu FTDX9000MP Operation Manual

In the default setting, the Main (VFO-A) frequency and Sub (VFO-B) frequency are changed individually using the
[ Main Tuning Dial ] knob and the [ SUB VFO-B ] knob.
If you want to tune the Main (VFO-A) frequency and Sub (VFO-B) frequency together, the VFO Tracking feature is
very useful.
Here is the procedure for activating the VFO Tracking feature:
1. Press the [ MNU ] switch to enter the Menu mode.
2. Rotate the [ Main Tuning Dial ] knob to select Menu item "GENERAL 039 TRACKING."
3. Rotate the [ CLAR/VFO-B ] knob to select the desired Tracking mode.
OFF: Disables the VFO Tracking feature.
BAND: When you change bands on the Main (VFO-A) side, the Sub (VFO-B) frequency will automatically
change to be the same as that of VFO-A.
FREQ: This function is the almost same as "BAND," however, furthermore, the Sub (VFO-B) frequency changes
together with the Main (VFO-A) frequency when turning the [ Main Tuning Dial ] knob.
4. Press and hold in the [ MNU ] switch for two seconds to lock in the new configuration and exit to normal opera-
tion.
FT 9000MP O
DX PERATION
C C C C C
ONVENIENT ONVENIENT ONVENIENT
ONVENIENT ONVENIENT
S -F
PLIT REQUENCY

VFO Tracking Feature

M
ANUAL
T T T T T
RANSMITTER RANSMITTER RANSMITTER
RANSMITTER RANSMITTER
O
PERATION
A A A A A
CCESSORIES CCESSORIES CCESSORIES
CCESSORIES CCESSORIES
Page 105