Vfo Tracking Feature - Yaesu FTDX5000 Series Operating Manual

T
RANSMITTER

VFO Tracking Feature

In the default setting, the VFO-A frequency and VFO-B
frequency are changed individually using the Main Tun-
ing Dial knob and the [ CLAR ( VFO-B )] knob.
If you want to tune the VFO-A frequency and VFO-B fre-
quency together, the VFO Tracking feature is very useful.
Here is the procedure for activating the VFO Tracking fea-
ture:
1. Press and hold in the ( VFO-B )[ RX ] button for two
seconds. This provides a "Short-cut" to Menu item "038
GENE TRACK".
2. Rotate the ( VFO-B )[ SELECT ] knob to select the de-
sired Tracking mode.
OFF: OFF OFF OFF OFF
Disables the VFO Tracking feature.
BAND: When you change the band on the VFO-A side, BAND BAND BAND BAND
the VFO-B band will automatically change to
be the same band as VFO-A.
FREQ FREQ: This function is similar to the "BAND FREQ
FREQ FREQ
and will additionally "lock" VFO-A and VFO-
B together. Turning the Main Dial will tune both
VFO-A and VFO-B simultaneously.
3. Press and hold in the ( VFO-B )[ RX ] button for two
seconds to lock in the new configuration and exit to
normal operation.
Page 84
C
ONVENIENCE
S -F
PLIT REQUENCY
BAND" setting, BAND BAND
BAND
F
EATURES
O
PERATION
FT 5000 O
DX
( VFO-B )[ RX ] Button
( VFO-B )[ SELECT ] Knob
M
PERATING ANUAL