Table of Contents
Advertisement
Changing the selected
program
Switching off the Cooking
Sensor
Cooking advice
Food frozen in a block
Preparing food that
releases a lot of water ( for
example, fillets of fish )
To prepare food that
creates a lot of foam ( for
example pasta)
Thickening food
Food, for example
potatoes, cooked
irregularly
The beep does not sound
26
8
. Activate the function by pressing ÔÜ.
The temperature symbol remains lit until the required
temperature is reached. A signal will then sound. The
temperature symbol will go out and an alert will
appear on the display.
The Cooking Sensor will maintain the pan within the
set temperature range.
Select the cooking zone.
Return to the function menu using the ÔÜ
symbol. Then move to the next line using navigation
sensor X and select the required dish using
the + and - symbols.
Switch off the cooking zone. Cover the cooking
sensor so that the lens remains clean.
Place the frozen food in the recipient, for example,
spinach.. Add liquid according to the manufacturer's
instructions. Cover the recipient. Select the
temperature range of 70 ºC. Remove from time to
time.
When cooking with a small amount of liquid, two
fingers deep is sufficient Always cover of the recipient.
When cooking food that releases foam, cover the
recipient This will save energy.
Cook food at the recommended temperature When
thickened, allow humidity to evaporate at 90°C
Use more water.
Always cover the recipient. In this way,the automatic
control will function normally.
Advertisement
Table of Contents
