Table of Contents
Advertisement
Egg timer
How to program the timer
Once the time has elapsed
Correcting the time
Switching the egg timer off
Suggestions and warnings
38
The egg timer allows you to program a time of up to
99 minutes. It is independent of the other settings.
The hob must be switched on.
1.
Press the 0 symbol, U, 00:00,
appear on the time program function display.
2.
Set the required time using the symbols 0 to 9 or
the + and - symbols.
On the display, the setting will be programmed
from right to left.
+ symbol = 10 minutes
- symbol = 5 minutes
The timer starts to count down after a few seconds.
A buzzer sounds. 00:00 appears on the time program
function display. Press the 0 symbol. The indicators
go out and the buzzer stops.
Press the 0 symbol and change the time using the
symbols 0 to 9 or the + and - symbols.
Set it to 0 using the symbols 0 to 9 or the + and -
symbols.
After a power cut, the time program function will no
longer be activated.
When the ° symbol is pressed and the time has not
been programmed, an alert will appear on the display.
and
will
min
sec
Advertisement
Table of Contents
