Table of Contents
Advertisement
Fixing malfunctions
Display
none
Data memory error -
See user manual
E flashes
EÖ + number/
p + number/
+ number/
F0/F9
F2
Malfunctions are generally caused by minor faults.
Before contacting the Technical Assistance Service,
ensure you have read the following recommendations
and warnings.
Malfunction
The electric power supply
has been switched off.
The appliance has not
been correctly connected
according to the
connection drawing.
Electronic system
malfunction.
There is an internal error
in the system
The control panel is damp
or an object is resting on it
Electronic system
malfunction
There is an internal error
in the system
The electronic system has
overheated and the
corresponding cooking
zone has been switched
off
Measure
Use other electrical appliances to check if there
has been a power cut.
Check that the appliance has been connected
correctly according to the connection drawing.
If the checks above do not remedy the
malfunction, contact the Technical Assistance
Service.
Notify the Technical Assistance Service.
Dry the control panel area or remove the object.
Disconnect the hob from the mains. Wait a few
seconds before connecting it again.
If the indication continues, notify the Technical
Assistance Service.
Disconnect the hob from the mains. Wait a few
seconds before connecting it again.
If the indication continues, notify the Technical
Assistance Service.
Wait until the electronic system has cooled down
sufficiently. Then press any symbol on the hob.
If the indication continues, notify the Technical
Assistance Service.
45
Advertisement
Table of Contents
