Digital Video Recorder
6.7.3
Event setup
Figure 6.35 The Event setup window
1.
2.
6.7.4
Network setup
Figure 6.36 The Network setup window
TCP/IP settings
The [DHCP], [IP address], [Subnet mask], [Gateway], [Primary DNS], [Secondary DNS] and [Remote
client port no.] option settings are not available in the client program. You can set these options in
the system menu of the DVR.
Bosch Security Systems
Set the event options.
•
Input: Displays the number of the ALARM I/O port.
•
Input type: The alarm state can be set to either N.O. (Normally Open) or N.C. (Normally
Closed).
•
Linked camera: Select the connected camera channel with the ALARM I/O port.
•
Relay out: Select the alarm output number of the RELAY-OUT terminal for the output alarm
signal.
Setting [Alarm ackn.] options.
•
Alarm ackn.: Set the "Manual" or "Post-event time" option to off.
User Manual
101
Control Center | en
F01U | 1.0 | 2007.11