Digital Video Recorder
Display settings
Figure 6.31 The Display setting window
1.
2.
3.
6.7.2
Schedule setup
Figure 6.32 The Schedule setup window
1.
2.
3.
4.
Bosch Security Systems
Set the OSD options.
Set the monitor A option.
Set the monitor B options.
Select a day of the week.
Mark up the desired recording option.
•
No record: Do not schedule recording.
•
Continuous: Recording starts automatically at the preset time.
•
Input: Recording starts automatically when an input is activated within a designated time.
•
Motion: Recording starts automatically when motion is detected within a designated time.
•
Input+Motion: Recording starts automatically when input and motion detection occur
within a designated time.
Select the channel to set the schedule.
Click the start time cell block and drag & drop to select a time period cell block.
or
Click the start time cell block of a channel and drag & drop across the channels to select the
time period block for multi-channel setting at the same time.
The color of the cell blocks will change.
User Manual
Control Center | en
F01U | 1.0 | 2007.11
99