Back Panel - Bosch DVR-8K Operation Manual

Digital Video Recorder
2.4

Back panel

DVR-16K / DVR-16L
a
d e f
DVR-8K / DVR-8L
a
d e f
Figure 2.3 Back panel
a
b
c
d
e
f
g
h
i
j
k
l
Bosch Security Systems
b
g h i
b
g h i
VIDEO INPUT: Connect the camera's video output to these BNC connectors.
LOOP OUT: The signal from VIDEO INPUT connector is looped out to this connector.
Power Cord Inlet (AC IN): Connect the power plug.
AUDIO OUT: Connect the audio input signal of an external device.
BIPHASE: Connect a pan/tilt/zoom control unit via the supplied 15-pole D-type connector
board.
AUDIO IN: Connect the audio output of an external device.
ALARM I/O: Connect up to 16 alarm inputs via the supplied 25-pin D-type connector board.
Connect up to 8 alarm output relays via the supplied 25-pin D-type connector board.
RS-422/485 Terminals: Connect RS422/485 compatible cameras.
KBD IN: Connect a Bosch CCTV keyboard unit to the KBD IN socket.
COM1: Use to connect to a host device equipped with RS-232C connector (such as a personal
computer).
ETHERNET Port: Connect the ethernet 10/100Mbps network cable for controlling this unit via
a PC network.
MON B (BNC Type Connector): Connect to spot monitor or display device.
j k fl m
j k l m
User Manual
Introduction | en
c
n o
c
n o
13
F01U | 1.0 | 2007.11