Event Setup - Bosch DVR-16L-100A Operation Manual

Digital Video Recorder
6. Enter the name of the exception day.
7. Click the add button to add the special day settings.
The exception day is added to the list.
If you want to cancel the registered exception day, select the exception day in the list and click
the delete button.
6.7.3

Event setup

Figure 6.35 The Event setup window
1. Set the event options.
•
•
•
•
•
2. Setting [Alarm ackn.] options.
•
Bosch Security Systems
Input: Displays the number of the ALARM I/O port.
Input type: The alarm state can be set to either N.O. (Normally Open) or N.C. (Normally
Closed).
Linked camera: Select the connected camera channel with the ALARM I/O port.
Relay out: Select the alarm output number of the RELAY-OUT terminal for the output alarm
signal.
Preset: Select the preset number. When the input is activated, the camera moves to the
selected preset position and the picture of the camera in that position appears on the
monitor.
Alarm ackn.: Set the "Manual" or "Post-event time" option to off.
User Manual
103
Control Center | en
F01U | 2.0 | 2008.12