Table of Contents
Advertisement
Digital Video Recorder
3.5
CCTV keyboard connections
The keyboard input connector is used to connect an external CCTV keyboard to the unit. Connect
the keyboard to the KBD IN connector.
For short distances (up to 30m), standard 6-core telecom flat cable can be used to supply power
and signal connections for the keyboard.
For distances over 30m between keyboard and Divar MR, the Keyboard Extension Kit (LTC 8557)
must be used. This kit provides junction boxes, cables and the appropriate power supply for the
external keyboards. The recommended cable type is Belden 9841 or equivalent.
3.6
Network connection
3.6.1
LAN connection
Connect the LAN port to an available 10/100 base-T port with a straight ethernet cable (not
supplied).
3.6.2
Automatic network configuration
The DVR can automatically obtain and configure the network interface via DHCP.
3.6.3
Manually configure network
The DVR may be manually configured by assigning an IP address, subnet mask, gateway DNS.
3.7
Connecting the USB device
3.7.1
USB memory device
Insert the memory device into the USB port. The system automatically recognizes the device.
Using a USB memory device the system software can be easily upgraded.
3.7.2
USB backup device
Connect the USB cable of the USB backup device to the USB port on the rear panel of the unit.
(Example: HDD or other external storage).
3.7.3
Mouse
Connect the USB mouse for function control of the unit.
Bosch Security Systems
User Manual
Connections and settings | en
F01U | 1.0 | 2007.11
19
Hide quick links:
Advertisement
Table of Contents
