Event Setup Tab; Configuring The Area Of Motion - Bosch DVR4C Applications Manual

DVR4C
Event Setup
Profiles
Exception Days
Table 2.9 Example of Configuring the Recording
27. Press the down arrow button to select Exception Days, within the Profiles tab.
28. Press the right arrow button and edit the Start Time & Date to 06-16 7:00 AM (month,
29. Press the right arrow button and edit the Duration to 8 hours and 30 [min].
30. Press the right arrow button to select Weekend Night under Profile which uses the
31.
Event Setup
Profiles
Exception Days
Table 2.10 Example of Configuring Exception Days
2.3

Event Setup Tab

The Event Setup tab allows the user to set the parameters within the camera's field of view
for recording. For example, use this tab to record motion in one specific area such as the cash
register or door.
2.3.1

Configuring the Area of Motion

To configure the area of motion, do the following:
1.
2.
Bosch Security Systems, Inc.
b. In the Day Start field, select 7:00 AM then, in the Day End field select 5:00 PM Then,
press ESC to exit.
System Settings
Current Profile
Week Start
Week End
Day Start
Day End
day, time).
7.5 IPS and Low quality profile which was specified earlier.
Note: It is recommended to use a profile (Weekday Day, Weekday Night, Weekend Day,
or Weekend Night) which is already being used for exception days unless the user wants
to permanently change the profile. Otherwise, the user must remember to change the
profile immediately before the exception day has started and immediately after the
exception day has been completed.
Press ESC to exit.
System Settings
Exception Days
Start Date & Time
1 06/16 07:00 AM
2 01/01 12:00 AM
3 01/01 12:00 AM
4 01/01 12:00 AM
5 01/01 12:00 AM
6 01/01 12:00 AM
7 01/01 12:00 AM
8 01/01 12:00 AM
9 01/01 12:00 AM
+10 01/01 12:00 AM
Press the MENU button on the front panel of the DVR4C unit.
Press the right arrow button to select Event Setup, then press the down arrow button to
select the respective camera number (1-4) to set the parameters for recording (see
Table 2.11).
Applications Manual
Motion Only and Continuous Recording | en
Profiles
Weekend night
Mon.
Fri.
07:00 AM
05:00 PM
Profiles
Duration Profile
08:30 WndD
00:00 WkD
00:00 WkD
00:00 WkD
00:00 WkD
00:00 WkD
00:00 WkD
00:00 WkD
00:00 WkD
00:00 WkD
F01U074954 | 1.0 | 2007.07
7