(4) Display of number of ROM
When MENU and the TOP MENU key are pushed in the test mode, the number of ROM of the main
microcomputer, a sub-microcomputer, the unit microcomputer, and microcode is displayed on the FL
display instead of the test display.
Transmission command: C2(ROM VERSION REQUEST)
Data from unit CPU is as follows.
FIX4
BYTE11: Ver subordinate position byte of unit CPU
BYTE12: Ver high-ranking byte of unit CPU (HEX)
BYTE13: Date of microcode(ASCII)
FL display (When you press MENU:five seconds).
U
N
I
M
C
:
FL display (When you press TOP MENU:five seconds).
S
Y
S
D
V
D
(5) Servo relation examination command
The following processing is done to ten keys in the test mode respectively.
[ 1 ] : Start & reproduction of DISC (reproduction from starting position)
[ 2 ] : TNO+1 search of CD
[ 3 ] : TNO-1 search of CD
[ 4 ] : The CD_LD lighting (Turn off with the stop button).
[ 5 ] : The DVD_LD lighting (Turn off with the stop button).
[ 6 ] : DVDx1.4 jitter measurement mode
[ 7 ] : Unused
[ 8 ] : The display (The address is done and -1 is done).
[ 9 ] : The display (The address is done and +1 is done).
( [8] and [9] are the stop button and Back to Top. )
Version of unit microcomputer
T
:
0
1
2
J
:
1
:
1
Version of sub-microcomputer
0
1
9
A
N
0
Microcode
.
0
8
.
0
7
UX-A10DVD
0
1-43