Table of Contents
Advertisement
Appendix
Handset battery
It takes up to 11 hours for the battery to be fully charged. When it is fully
charged, you can expect the following performance:
Operation
While in handset use (talking*)
While in speakerphone mode (talking*)
While not in use (standby**)
* Operating times vary depending on your actual use and the age of the battery.
** Handset is not charging or in use.
The battery needs charging when:
•
A new battery is installed in the handset.
•
The handset beeps.
•
A battery is properly installed and the screen is blank.
•
Low battery or Place in charger displays on the handset screen.
CAUTION:
To reduce the risk of fire or injury, read and follow these instructions:
•
Use only the batteries provided or equivalent. To order a replacement, go to
www.vtechcanada.com or call 1 (800) 267-7377.
•
Do not dispose of the batteries in a fire. Check with local waste
management codes for special disposal instructions.
•
Do not open or mutilate the batteries. Released electrolyte is corrosive and
may cause burns or injury to the eyes or skin. The electrolyte may be toxic
if swallowed.
•
Exercise care in handling batteries in order not to create a short circuit with
conductive materials.
•
Charge the batteries provided with or identified for use with this
product only in accordance with the instructions and limitations specified in
this manual.
•
Observe proper polarity orientation between the battery and metallic contacts.
•
To prevent fire or shock hazard, do not expose this product to water or any
type of moisture.
Operating time
Up to seven hours
Up to five hours
Up to seven days
129
Advertisement
Table of Contents
