AT&T CareLine SN1197 Complete User's Manual page 73

Multiple handset use
Intercom
To initiate an intercom call at the telephone base:
Press MENU, then press or to scroll to
1.
Intercom, then press SELECT.
• If you have only one handset/pendant,
the telephone base shows
Calling HANDSET 1/Calling all
pendants. The handset/pendant rings.
The handset shows BASE 0 is calling.
• If you have two or more handsets/
pendants, your telephone base shows
INTERCOM TO: Press
the desired device and then press
SELECT. You may also enter a destination
handset number (1-9), or enter
by 0-2 for HANDSET 10 to HANDSET 12, or
followed by
The destination device rings. The
destination handset shows
BASE 0 is calling.
The telephone base shows Calling
HANDSET X/Calling all pendants/
Calling all devices.
To answer the intercom call on the destination handset, press ,
2.
or any dialing key (0-9 or
-OR-
To answer the intercom call on the pendant, press
or to scroll to
#
for all handsets.
). Both devices now show Intercom.
66
9:48am
Answering system
Intercom
Photo speed dial
BACK
9:48am
INTERCOM TO:
HANDSET
HANDSET
BACK
followed
9:48am
Intercom
END
.
5/20
SELECT
5/20
1
2
SELECT
BASE 0
is calling
5/20
MUTE