Handset; Inserting And Removing The Handset's Battery Pack - AT&T MDW 9010 Installation And Use Manual

Handset

This section explains how to install the handset battery pack, test the handset, and fill out
labels.
Inserting and Removing the
Handset's Battery Pack
To insert the battery pack, insert the tab in the
1
battery pack into the hole along the top edge of
the battery compartment on the handset.
Press the battery pack downward to lock it into
2
place.
The battery pack must be charged prior to use. See
"Battery Charger" earlier in this chapter for instruc-
tions.
To remove the battery pack, grasp the finger
3
grips on both sides of the battery pack, then
gently pull the battery pack upward and out.
Battery Tab
Finger Grip
Installing the MDW 9010 2-31